EIFS Probe has 4" metal penetrating tips (no drilling needed), insulated with epoxy coating, and is equipped with wrist strap and holster with belt loop.

Replacement Pins for the Protimeter Heavy Duty Slide Hammer Electrode (# M501-5055HP).

An insulated contact pin with 1/2" penetration. Used with the 26-ES Hammer probe (#M750).

This added versatility will prove invaluable in ducts and other awkward areas.

This 20-pack of Humidity Sleeves For Protimeter Hygromaster Hygrometer (# M418) are used for measurement of RH% in concrete slabs (slotted style: 1.69 length x 0.6" dia.[43mm length x 16mm dia.]). Requires 5/8" (16mm) concrete drill.

Works with both Compact and Professional Tramex moisture meters M283 and M285.

Delmhorst P-2000, Digital Paper Moisture Meter Electrode Double Roller Type measures moisture content on a moving web.

Seamlessly match your need with the perfect probe designed to extend the versatility of any of the workhorse Delmhorst Moisture Meters.

Functional, comfortable lucite handle attached to 4" insulated pins is perfect for EIFS (Exterior Insulated Finish System) testing.

The Protimeter 'Heavy Duty Moisture Probe and Lead' can be used with any Protimeter moisture meter and is designed for the measurement of moisture in awkward corners, or at high and low levels.

Contact pins and retainer with overall penetration of 11/16"(package of 24). Standard on all J- and BD-series meters and #2-E electrode(#M696)

Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.

Tramex Tapered Pins for use with Professional (# M285) and Compact (# M283) Moisture Meters.

4 Inch Replacement Pins For Protimeter Surveymaster Portable Moisture Meter EIFS Probe (# M815P).

Functional, comfortable lucite handle attached to 1 7/16" pins is perfect for plaster, masonry and wood testing

Contact pins and retainer with overall penetration of 5/16"(package of 24). Standard on all J- and BD-series meters and #2-E electrode(#M696).

Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4" overall length, 3 1/4" penetration. Used on roofing, insulation, timber and poles.

An insulated contact pin with 1/2" penetration. Pin Length Overall: 1-7/16".

An insulated contact pin with 1/2" penetration. Pin Length Overall 1 1/2".

The Delmhorst Hammer Probe Penetration Electrode can be configured for ½" to 1 1/8" penetration!