|
Measure moisture levels in flooring with this Tramex Concrete Moisture Meter and Relative Humidity Meter
Features & Applications:
The Tramex Concrete Moisture and Relative Humidity Meter Kit measures moisture content, relative humidity, temperature and dew point in concrete and gypsum flooring.
The Tramex Concrete Moisture and Relative Humidity Meter enables you to carry out 4 individual tests:
- Measure non-destructively and instantly the moisture content in concrete and gypsum flooring
- Measure the relative humidity, temperature and dew point within the floor slab or screed using the
(below surface) In-situ method
- Measure the relative humidity, temperature and dew point above the surface of the floor slab or screed using RH hood test methods
- Measure the relative humidity, temperature and dew point of the environment that the floor is
being installed
Features:
- Two versatile measuring modes, measures moisture content plus relative humidity, temperature and dew point with plug in RH probe
- User can switch between moisture meter and hygrometer modes
- Non-destructive moisture measurement
- Stores up to 900 recorded readings in 30 files
- Recorded readings can be recalled and displayed on dot matrix LCD
- Download recorded reading to pc for transfer to word processing or spread sheet
- Choice of scales to suit different types of floor slabs and screeds
- Operates on time proven impedance measurement principle
- Instant readings on clear LCD display
Complete kit includes:
- Concrete CRH instrument
- 2 Relative Humidity/Temperature probes with cable/RJ11 connectors
- 13 Plastic hole liner insert kits for below surface RH measurements
- PP3 Lithium Manganese battery
- RS232 cable
- CRH Software
- Calibration check for field testing RH probes
- Hard carrying case
Spec Summary:
Moisture Measurement Mode |
Measurement: |
Non-destructive impedance |
Measurement range: |
Concrete 0 to 7% |
Anhydrite and Gypsum screeds: |
0 to 12 (comparative)
Reference 0 to 100 |
Resolution: |
0.1% MC concrete |
Housing material: |
ABS plastic |
Hygrometer/RH Mode (RH Probe) |
Measurement: |
Solid state capacitive RH sensor |
Measurement range: |
5 to 98% RH
14 to 120°F
-10 to 50°C
0.1% RH, 1ºC/ºF Housing Material (Probe).
Stainless Steel/plastic Accuracy (after calibration) at +68ºF(+20ºC)
Temperature +/- 1ºF.
Relative Humidity (5 to 95%) +/_ 3% Response time (90%)
at + 68ºF (+20ºC) in still air approx 60 Seconds.
Typical response time when in concrete and the probe and the concrete are
at the same temperature (stabilized hole/sleeve): approx 30 minutes |
Resolution (RH): |
0.1% RH, 1°C |
Housing material (PROBE): |
Stainless steel |
Power supply: |
9V PP3 lithium manganese battery |
Software: |
Supplied on customized CD |
Stored readings: |
900 readings in 30 files |
Display: |
Dot Matrix LCD |
Interface: |
RS-232 Serial |
Dimensions |
CRH |
6 x 3 x 1.4" (150 x 80 x 35mm) |
Probe: |
0.4 x 4.3" (10 dia x 110mm long) |
CRH kit: |
3.4 x 17 x 1.6" (340 x 430 x 100mm) |
Weights |
CRH only: |
0.77 lbs (0.35 kg) |
Complete kit in case: |
5.8 lbs (2.2 kg) |
Shipping Weights |
CRH only: |
0.77 lbs (0.45 kg) |
Complete kit in case: |
6.4 lbs (2.9 kg) |
| Electromagnetic immunity standard complies with: EN 50082-1 |
| Compatibility Emission standard complies with : EN 50081-1 |
|
